Guide :Radio Communications : 148 GTL 120-Channels Base CB Radio

I have 148F AND IT HAS 5 PLUG ON THE MIC INSTEAD OF 4 PIN

I have a 148f and i cant find a manual(user) for it, also it has a counter. the mic has 5 pin insteads of 4 pin like the 148 gtl any info would help

Research, Knowledge and Information :


cb mic wiring page - m0ysu.com


Back to 4 pin. Put the plug into the radio and look at the solder pins. ... MIC PLUGS SHOWN FROM THE SOLDER PIN SIDE: President Lincoln Uniden 2830: T = Transmit
Read More At : www.m0ysu.com...

Single 3.5mm, 4-pole plug to USB - [Solved] - Components


... 4-pole plug I have a logitech G430 that i have ... solved Question about headset with mic and a single 3.5mm plug; ... solved 10 pin to rca w/ lighter plug and ...
Read More At : www.tomshardware.com...

The CB Radio Talk Forum - 4 pin mic to 5 pin adapter


The CB Radio Talk Forum. ... hassle instead of quickly switching radios and mic's ... and DX116 mic's and other weird 4-pin mic plugs that have a larger ...
Read More At : www.cbradiotalk.com...

Headset uses one cable, mic doesnt work. - Components


Headset uses one cable, mic doesnt ... Because your laptop is quite recent it will support the 4 pin layout ... jack plug a 4 pole one ,if so you will need a 4 ...
Read More At : www.tomshardware.com...

How to Hack a Headphone Jack - Circuit Basics


How to Hack a Headphone Jack. ... I have the audio transformer and the laser set up to be my transmitter but instead of ... The diagram for the TRRS plug has the mic ...
Read More At : www.circuitbasics.com...

Laptop using default mic instead of plugged in mic but only ...


Laptop using default mic instead of plugged in mic but only one microphone listed in recording devices.
Read More At : www.tomsguide.com...

The CB Radio Talk Forum - Uniden grant xl 5 pin to 4 pin adaptor


The CB Radio Talk Forum. ... I have an older Cobra 148F GTL with a 5-pin mic connection. ... Get a 5-pin plug for it.
Read More At : www.cbradiotalk.com...

All about the various PC power supply cables and connectors


The picture above shows an adapter which allows you to plug a 20 pin power supply ... power supply doesn't have a 4 pin 12 V ... often used instead of a 4 pin ...
Read More At : www.playtool.com...

Suggested Questions And Answer :


I have 148F AND IT HAS 5 PLUG ON THE MIC INSTEAD OF 4 PIN


Or try this it's the wireing for the 148GTL which should be the same. Pin-1 White, Pin-2Shield, Pin-3 Blue, Pin-4 Red, Pin-5 Blk
Read More At : 148 GTL 120-Channels Base CB Radio...

Need Cobra 148GTL with Cobra HG M75 pin-out color code


The above wiring combination does not work
Read More At : 148 GTL 120-Channels Base CB Radio...

Changing 5 pin jack to 4 pin jack on radio - Cobra 148 GTL 120-Channels Base CB Radio


You can buy an adapter at Radio Shack ....hope this was helpful....
Read More At : 148 GTL 120-Channels Base CB Radio...

On rx , i have a low carrier , sometimes cannot hear someone vs another radio


Depends on how it was modded? Were both the TX and RX broadbanded and tetuned?? Possibly poor work..
Read More At : 148 GTL 120-Channels Base CB Radio...

Can not recieve properly


IN your CB there are 25 tuneing slugs (square matal cans with ferrite tuneing slugs) if you speaker output is low leavel but still clear and free of hash the set should be ok , but you will need to tune these slugs with a small jewlers screw driver (WITH GREAT CARE) as the slugs break easy. If you want to email me it will not be a problem ,cheers , DENNIS [email protected]
Read More At : 148 GTL 120-Channels Base CB Radio...

Cobra 148 GTL steady tone though speaker


Try rerouting your coax cable and make sure it's long enough
Read More At : 148 GTL 120-Channels Base CB Radio...

Have a cobra 148 gtl cb/ssb. It is brand new. I hvae it hooked up and have tuned the antenna using the swr meter on the cb. I habe channel 1 and channel 40 metting at about 1.6 swr. I have what appears to be good distance reception but little output.


Hi, my name is John. Welcome to FixYa. Check your antenna, you need to set it with a real SWR meter, pick one up at any near-by CB shack $10.00. Thanks for choosing Fixya...John
Read More At : 148 GTL 120-Channels Base CB Radio...

Low watts out putt


I do not know if that is the case. If it is just the finals, I don't belive they would not be that expensive. I can do some research and see. Off the top of my head, I am unsure of which final they have. You can send me a reply at [email protected]. I drive truck full time and run my cb shop part time. If you are along one of my loads, I can stop off and take a look at the radio. Dean Pitts Rollin CBs Mt. Vernon, TX
Read More At : 200 GTL DX 4-Channels Base CB Radio...

5 pin mic


All "older", "real" or "desirable" Cobra 148 GTLs came with side-mounted 5 pin microphone sockets. For wiring information, see... http://www.offroaders.com/info/tech-corner/reading/mic-wiring.htm
Read More At : 148 GTL 120-Channels Base CB Radio...

Keys up and everything dims and does not transmit.


Moving the volume/on/off knob to make the radio work again is interesting and a good clue. On most CB's, the pot is probably soldered directly to the printed ciruit board.It's possible that there is a bad solder joint to the power connections on the pot that turn the radio on & off. If the solder joint is bad, it can still make a connection but the connection will have added resistance in line. The on/off switch can be bad too.Switches arc each time they are used and over time, the contacts become pitted and make poor connection.I had a stereo receiver where the tuner lights flickered and there was electrical noise in the receiver. It turned out to be a bad on/off switch.This resistance may be low enough not to affect the radio when in the receive mode but when you transmit and draw more current that resistance will be noticable during transmit.The fact that you rotate or move the volume/on/off knob and the radio starts working again, tells me that there may be a bad connection in the radio.A cheap thing you can try is spraying some electrical contact cleaner into the pot and rotate the pot back & forth several times and turn the switch on & off several times to clean it.Please let me know if I can be of further assistance to you.Good luck!- Jim
Read More At : 148 GTL 120-Channels Base CB Radio...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || radiocomunicate.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1536 seconds