Guide :Radio Communications : MT1000 Compatible 2 Way Radio Battery Eliminator

Freq lock up

Follow up on mt 1000..i ssuspect there may be freqs programme dout of bandsplit or band spread of radio.......ex radio my go to 158 and some 160 meg stuff programmed...no problem as long as those channels not accessed.however if req up and down or ch up and down are toglled.whne it goes to those freqs..radio locks up and shows 88 on freq display....i have laptop, rib , cables and software .what must be done to unlock radio.will not unlock by powering down..ROY

Research, Knowledge and Information :


Frequency detector for fast frequency lock of digital PLLs D


Frequency detector for fast frequency lock of digital PLLs ... frequency lock, ... proposed frequency detector; (ii) with an up–down counter as a
Read More At : eecs.oregonstate.edu...

Phase-locked loop - Wikipedia


A phase-locked loop or phase lock loop abbreviated as PLL is a control system that generates an output signal whose phase is related to the phase of an input signal.
Read More At : en.wikipedia.org...

Frequency Locking and GPS - G4JNT


VE2ZAZ GPS Derived Frequency Reference - Bertrand ... but ought to be kept running continuously due to long lock-up ... Simple frequency locking of local ...
Read More At : g4jnt.com...

BC75XLT - The RadioReference Wiki


Search Lockouts - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, ... BC75XLT Scanners for Sale.
Read More At : wiki.radioreference.com...

Patent US6411660 - Device for reducing lock-up time of ...


A device for reducing a lock-up time in a digital cordless telephone. The telephone includes a first frequency synthesizer for generating a reference frequency, a ...
Read More At : www.google.com...

Locking and Unlocking transmitters and receivers | Shure ...


Locking and Unlocking transmitters and receivers. ... (Power & Frequency) Lock or Unlock: ... hold the EXIT button and press the UP Arrow button.
Read More At : shure.custhelp.com...

BC75XLT Owner’s Manual - C. Crane


BC75XLT Owner’s Manual ... Search Lockout - allows you to lock out up to 200 search frequencies (100 temporary and 100 permenant) in Custom, Service, ...
Read More At : ccrane.com...

Phase Locked Loop Circuits - Electrical and - UC Santa Barbara


Phase Locked Loop Circuits Reading: General PLL Description: T. H. Lee, Chap. 15. ... the VCO frequency up to catch up with the input reference signal.
Read More At : www.ece.ucsb.edu...

CPU frequency scaling in Linux with cpufreq - Pantz.org


CPU frequency scaling in Linux with cpufreq ... up _threshold - This ... You can change this value to anywhere between 0 and 100 where '0' will effectively lock your ...
Read More At : www.pantz.org...

BC125AT Owners Manual - Uniden


BC125AT Owners Manual ... program up to 500 frequencies into the scanner's memory either ... search Lockouts - you can lock up to 200 search frequencies:
Read More At : www.uniden.com...

Suggested Questions And Answer :


Mt1000 lock up


I think there is a problem with the Synthetizer, you will need quilyfied service. This could be caused when you change frequency, the Synth, can not be able to "produce" the desired freq. caused for a problem in this area, this causes to the radios get PLL UNLOCKED and this could be the way that the radio give an alert to the user.
Read More At : MT1000 Compatible 2 Way Radio Battery Eliminator...

Freq lock up


If you have programming cables and SW you can program a freq. in the center of the band,in slimplex. Question, can you read this radio?
Read More At : MT1000 Compatible 2 Way Radio Battery Eliminator...

Display lock up


This happened when try to program the radio en frequencies out of band of radio?
Read More At : MT1000 Compatible 2 Way Radio Battery Eliminator...

Codeplug locks up during progamming. Seems to read OK, but takes several tries


Is the programming lead ok. No breaks
Read More At : MT1000 Compatible 2 Way Radio Battery Eliminator...

HT 1000, MT1000, Radius P110 Tx problems


Sounds like if you had them reprogrammed you might want to look at the "Transmit Shifting" A few years ago the FCC changed the shifting on somebands to tighten them up. Also if your not running a repeater and someone programmed it to shift in transmit then that, can be a problem. Also if your radios are programmed with a PL transmit and receive tone and they don't match then that's a cause.... If you can give more information on what frequencies, PL's, repeater your using would be a great help. Example.... Transmit 468.500, Receive 463.500, PL transmit & receive tone 100. A slip of a number or PL tone will cause you a headache....
Read More At : HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery......

Battery volts check


With the battery fully charged, you can us a volt meter. Touching the wands to two separate battery contacts. (I believe it to be the outter two. But you will be able to tell from the reaction of your meter.) If it show you a negative number, simply reverse your wands. On the CLS1410 and its sister the VL50, there is a battery indicator built into the radio. It will show you on the screen how much charge is in the batteries. Also, with this style of radio, you are using a Li-Ion battery, which will last you about 12-14 months before you need to replace it. There is a date code on the white portion of the battery label. It is sometimes hard to discern. But if you look you'll see the year followed by the month and date. If the radio was fresh from Motorola when you bought it. The battery date should coincide with its true initial charge age.
Read More At : MT1000 Compatible 2 Way Radio Battery Eliminator...

I need a manual for Motorola MT1000


You can find part manual on following link: http://www.scribd.com/doc/8782854/MT1000-Userguide for parts details link: http://www.diversifiedelectronics.com/pdf/mt1000.pdf Please post back if it makes any changes. thank you
Read More At : MT1000 Compatible 2 Way Radio Battery Eliminator...

MT1000 Not receiving


Antenna connection inside rf deck may be loose. If that is it, resolder it.. One very common problem that the MT1000 had, along with its littlebrother, the HT600's, was that the antenna lug would break away from theboard. This can usually be repaired by desoldering and resoldering the lugat the PC board end. I do not recommend attempting this repair unless you have the appropriatedesolder/solder tools, and the skill to use same. There is some risk ofdamage to the board if it's not done right.
Read More At : MT1000 Compatible 2 Way Radio Battery Eliminator...

My radio does not turn on - Motorola GP300 Compatible 2 Way Radio Battery Eliminator


Check the battery or the power supply to the circuit, If there is not voltage to the main board this can be failure of the regulator. If not it can be fault in the control circuit. Check the output of the battery eliminator.
Read More At : GP300 Compatible 2 Way Radio Battery Eliminator...

Battery not charging - Motorola GP300 Compatible 2 Way Radio Battery Eliminator


The batteries not charging only means 2 things. the cells in the battery are at their end of life, or the charger's power output is going low because of worn coils or burnt coils.Best deal is to get both pieces tested so you'll have an idea on which one to replace. Battery Care Tips These battery tips will help you obtain optimized performance and a longer life cycle from your Motorola rechargeable battery. 1. Charge your new battery overnight before using it. This is referred to as INITIALIZING and will enable you to obtain maximum battery capacity. a. Nickel Cadmium or Nickel Metal Hydride: 14-16 hours. b. Lithium Ion/Polymer: 1 to 2 additional hours after the charger light turns green. 2. New Motorola impres batteries, when inserted into a Motorola impres charger, will indicate a calibration cycle by displaying a steady Yellow< indication on the charge status indicator. Allow this calibration process to complete by not removing the battery from the charger until it has completely charged and displays a steady green indication. 3. In order to minimize capacity loss and cycle life reduction, new, NON INITIALIZED batteries must be stored in well ventilated, cool and dry locations. Batteries stored in these conditions may be stored: a. Nickel Cadmium up to 2 years. b. Nickel Metal Hydride up to 18 months. c. Lithium Ion/Polymer up to 18 months. 4. If used batteries are to be removed from service for extended periods (greater than 30 days) they should be discharged to about 50% of their capacity before storage in a cool, dry location. 5. Batteries which have been in storage for more than two months should be fully discharged and recharged. a. Nickel Cadmium or Nickel Metal Hydride: 14-16 hours. b. Lithium Ion/Polymer: 1 to 2 additional hours after the charger light turns green. 6. When using a Motorola rapid charger, leave the battery in the charger for an additional 1 to 2 hours after the steady green light appears. (Applies to non-impres batteries only.) 7. Do not leave your radio and fully-charged battery in the charger when not charging. Continuous charging will shorten battery life. (Do not use charger as a radio stand.) 8. Only charge a battery when it needs it. If it is not fully discharged, do not recharge it. We suggest that you carry a spare. This is the most cost effective solution for users requiring longer operating time. 9. Do not return fully charged non-impres batteries to the charger for an "extra boost." This action will significantly reduce cycle life. Repeated short cycle charging of non-impres batteries will shorten battery life. (Do not use charger as a radio stand for non-impres batteries.) 10. Stabilize batteries to room temperature (72ºF) before charging. Charging below 40ºF and above 104ºF will decrease cycle life.
Read More At : GP300 Compatible 2 Way Radio Battery Eliminator...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || radiocomunicate.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1717 seconds