Guide :Radio Communications : Pro-96 Scanner

Pro-96 scanner My unit has been in repair 3 times for the same problem. the last service call they actually replaced the system board. Problem: scanner will not work until it is hot. After leaving unit on for about an hour, I am finally able to use. Any thoughts?

Posted by Tom Sirhan on Apr 27, 2007

Research, Knowledge and Information :


Konica Questions answered here | FixYourOwnPrinter


My K has been refilled 3 times. ... Not trained in Printer repair, but have done my share of work on ... My 2300w just started the same problem today, I am searching ...
Read More At : www.fixyourownprinter.com...

epson printer problems | FixYourOwnPrinter


I Have recently come across the same problem with the CX3650 i am at my wits end several ... so unit has been off ... that they may be able to actually help ...
Read More At : www.fixyourownprinter.com...

Symptoms of a Bad EGR Valve | AxleAddict


Recognizing symptoms of a bad EGR valve will ... although this could be your problem. Use the repair manual for ... Oil Filter has been replaced but same ...
Read More At : axleaddict.com...

Touch ID not working after screen replacement? - iPhone 6 ...


Touch ID not working after screen ... it will change but your finger print scanner will not work. ... fine until about an hour ago...they are getting the unable ...
Read More At : www.ifixit.com...

Scanner FAQ from Bill Cheek - Google Groups


Scanner FAQ from Bill Cheek ... has been repaired several times. ... Steve Work: 7/21/96 12:00 AM: Doug Hutton (Doug ...
Read More At : groups.google.com...

SOLVED: iTunes Error 53 - Please help! - iPhone 6 - iFixit


If it has been replaced putting the ... the same problem after new LCD ... actually confirm that this actually work. As a last resort when the day came ...
Read More At : www.ifixit.com...

StabiliTrak Problems - Free Lemon Law Help


While General Motors has been making phenomenal strides with many of their vehicles, we consistently see one problem plaguing the GM line, affecting a number of ...
Read More At : www.lemonlaw.com...

Chrysler Town & Country Stalling Problems - Lemon Law Blog


... 2013 at 9:48 am. Our 2010 Chrysler Town & Country has been ... After 6 times in the shop they finally replaced ... Ran fine until last week. Same thing…my ...
Read More At : www.lemonlaw.com...

BMW E30/E36 Air Bag Warning Light Reset | 3-Series (1983-1999 ...


... the problem is the airbag will work sometimes and then they wont work??? this car has not ... system has been replaced. My ... a repair shop several times the ...
Read More At : www.pelicanparts.com...

Top 981 Complaints and Reviews about BMW


... the same BMW policy/process has been adopted to ... to be replaced. After that repair the fuel ... not see any problem with the unit. So he would not ...
Read More At : www.consumeraffairs.com...

Suggested Questions And Answer :


Pro-96 scanner My unit has been in repair 3 times for the same problem. the last service call they actually replaced the system board. Problem: scanner will not work until it is hot. After leaving unit on for about an hour, I am finally able to use. Any thoughts?


Check the Plug in where the Harness Comes into Look for Broken Conns,,,,
Read More At : Pro-96 Scanner...

Pro 97 not working


If you have NO volume, and the squelch will not open up, the antenna is NOT the problem. Even with no antenna connected you will still hear white noise when the squelch is opened. The most common audio problem on this type of equipment is the failure of the shorting bar to make contact on the earphone plug. This is the spring clip that disconnects the internal speaker when you plug in an external speaker. A quick check by plugging in an external speaker that is known to be good. If sound returns, that is the problem. On the contrary, if it scans and does not stop on a known signal, like the weather channel that is broadcast 24/7, that could be a antenna problem. Sounds like two different issues.
Read More At : Pro-97 Handheld Scanner...

RS Pro 2020 Scanner won't come out of scan mode, pad ineffective


If you mean a Bearcat 2020 radio, then that unit is ancient, and I'm amazed that it still works. If you're only monitoring one frequency, you can get a really cheap scanner to do that and replace the 2020.
Read More At : Pro-2018 Scanner...

The RS Pro 96 digital scanner radio locks up. The display comes on but the keyboard is nonfunctional. Nothing on the keyboard will work. Resetting the unit does not help. The lock function is not on. Not sure what the problem is??


Check the small battery on the circuit board. Another possibility is that you don't have enough battery voltage to operate the unit. Even external power supplies may not produce enough voltage if the main battery is bad.
Read More At : Pro-96 Scanner...

Realistic pro-62 scanner emits high frequency buzzing noise after half hour or so of being switched on?


There is a problem with something breaking down in power supply side. It could be a filter capacitor or a semiconductor.
Read More At : Radio Communications...

Pro-95 will not scan, when first turned on, unit goes to manual mode with last selected channel. Upon selecting SCAN, unit will switch to SCAN mode, but will not move off the bank of last selected channel. Upon pressing MAN, the last selected channel comes up. I have pushed the reset button, have cleared memory per the manual, and have removed the battery for 30 minutes, with the same results. Nothing out of the ordinary is displayed on the screen. Since all the other features work, I think this is due a flag set in the program - I just don't know which one.


If you did the hold down '2' '9' reset, there isn't much more you can do. I have tried pulling out the battery pack and putting in a jumper wire between both battery contacts inside the radio (with no battery) and turn it on and let it sit for 1/2 hour. That's about the last thing to try. Only other goofy thing could be you got 'sticky pop' on the 'manual' button, so the radio thinks you pushed the manual button as soon as you turn it on. Make sure that the rubber isn't stuck around the manual button. You could try a QTip with 70% alcohol around the edge of the MANUAL button, but you also might wipe off some lettering at the same time, so use caution. Good luck and let me know how it goes.
Read More At : Pro-95 Handheld Scanner...

My 95 is way off - Freqs,Mode not working...Grrr!


MORE AND MORE POLICE AGENCIES ARE SWITCHING TO "DIGITAL TRUNKING". I CAN ONLY PICK UP PARTS OF MY LOCAL SHERIFFS STATIONS. RADIO SHACK HAS THE NEW dIGITAL TRUNKING SYSTEMS THEY COST ABOUT $500. I AM UP GRADING NOW. FOR TRUNKING ... WHEN YOU GET A ACTIVE CHANNELL KEEP HITTING THE RED TRUNK BUTTON TILL YOU SEE THE MOTOREOLA 5 NUMBEWR ID.THJEN HIT ENTER. I WANT THE NEW PROGRAMER THAT IS FAST ENOUGH TO FOLLOW DIGITAL HYPER-TRUNKING. ALL POLISE ARE GOING TO IT EVENTUALLY.
Read More At : Pro-95 Handheld Scanner...

Unit (Pro 95) will not scan trunk tracker stations at all. I have programmed this radio many times previously and it seems that the programming ROMs are misbehaving. The radio works fine in all modes except trunktracking EDACs.


Go to page 23 of the manual (at "http://support.radioshack.com/manuals/ome20-525.pdf" if you don't have it) it has some cures that you can try there. good luck!
Read More At : Pro-95 Handheld Scanner...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || radiocomunicate.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1271 seconds