Guide :Radio Communications : H700 Wireless Headset

Voice dialling on my phone did work then i pressed the volume buttons a bit, i then heard some strange noises?? now when i quickly press the call button it does not play the tone that indicates to say the name so you can do a voice dial, the first tone sounds and then nothing? the last number redial still works when you press and hold the call button but not voice dialling, how do i get it back on?!

Posted by James Twitchett on Mar 27, 2007

Research, Knowledge and Information :


db



5.65



why earpiece during calls not working but on skype ...


... I would get the second beep to say the name I get nothing. ... a voice-dial by pressing the call button, ... works if I call from my phone, but not if I'm ...
Read More At : www.hivmr.com...

db



Read More At : www.hivmr.com...

4.78



Read More At : www.hivmr.com...

Windows mobile - voice dialling kj - hivmr.com


Press and hold the call button until you hear ... hear that you are not getting a dial tone. Can I first of all ... 9500 and now cannot get voice dialling to work.
Read More At : www.hivmr.com...

Dusty Phones & 2 Way Radios - Dustygizmos


... tone dialling was the norm in the US and some other ... with a last number redial button, but back in ... old phone, so you can call the wife or ...
Read More At : www.dustygizmos.com...

PC Support Security Scams - ZFSENDTOTARGET CLSID Trick ...


... a known company name first and then direct you to a ... Now I’m hoping they call back some time so I can ... Did not get to the phone number / website ...
Read More At : www.webologist.co.uk...

Anything to Declare? - Stunty - Skins (UK) [Archive of Our Own]


... the pussy now then eh?" put my phone on charge and ... some more and pressed the reply button. My chicken shit ... she can't get hold of me. I'll call you ...
Read More At : archiveofourown.org...

Sound Studio Audio Techniques for Radio, Television, Film and ...


Sound Studio Audio Techniques for Radio, Television, ... And some that give back the Voice Lowder then it came, some ... but not so quickly that the clap sounds ...
Read More At : ja.scribd.com...

Taylor Varga (Worm/Luna Varga) | Page 3 | Sufficient Velocity


Taylor Varga (Worm/Luna Varga) ... and when I get back. I'll have my phone off the rest ... But even so I still have a lot of work to do to simulate the thing ...
Read More At : forums.sufficientvelocity.com...

An ISOT in Grimdark | Page 2 | Sufficient Velocity


... yourself why you did not get a pistol and are now out ... patient” and then pressed the buttons on ... So it lasted some time until it heard the ...
Read More At : forums.sufficientvelocity.com...

Suggested Questions And Answer :


Voice dialling on my phone did work then i pressed the volume buttons a bit, i then heard some strange noises?? now when i quickly press the call button it does not play the tone that indicates to say the name so you can do a voice dial, the first tone sounds and then nothing? the last number redial still works when you press and hold the call button but not voice dialling, how do i get it back on?!


Press both buttons at once to unmute the headset - you should hear two beeps, in ascending tone.
Read More At : H700 Wireless Headset...

H350 keeps redialing last number called.


Tell me the code you entered to get it paired and i can let you know your problem
Read More At : H350 Wireless Headset...

Working restricted area


I have seen a lot of those radios that has a "factory problem" to determ this fist check that: Both radios must to have same channel and same Code. Basically has to have the same numbers on display. Check if one of them has the Quiet Tone. Work in any area?--- if you have a Pair of radios they must to work between each other, mostly of this radios works in FRS frequencies as a Talk About from Motorola This radios can present some problems with frequency error, but if you have no the necesary equipment you could not to ajust it. I hope this tips can hel you Ernesto Garcia
Read More At : T7100 2-Way Radio...

I have two uniden GMR1088-2CK radios, If I press the transmit button on the side and speak into the Mike you can see tx appear in the display, the 2nd unit receives the call, rx appears in the display and you can hear my voice in the speaker which is how it should work. However when you press the transmit button on the second unit the tx symbol appears in the display but there is no sound from the first unit. The one thing I have noticed that is different between the two units is the first unit constantly displays the rx symbol to the left of the battery symbol and this never changes unless you press the transmit or call buttons. What I am trying to determine is obviously what the problem is and with which unit. Has anyone every had this issue and what was the resolution?


There are quite a couple of possibilities that could cause the problem you have explained. rx simply stands for receiver.To trouble shoot these devices will be a bit complicated so i would just list out the possible problems for you.1: Either the Microphone for unit 2 is not functioning well therefore does not pick what is said into the mic2: The speaker for unit 1 is faulty so receives the transmission but cannot send it out through the speakers.3: the rx symbol on display could mean the radio is already locked on a transmission probably due to interference. To sort this try resetting the unit. And clearing off all redundant connections from the unit memory. Let me know the outcome of this.Hope this solution has been helpful?
Read More At : Radio Communications...

Motorola H350 - Incoming calls


There is nothing you can do about the delay as it's the time it takes for the bluetooth to send the signal to your earpiece to tell it the call is answered, the only way to stop any delay is to set your phone to auto answer in the bluetooth headphone settings or in the call settings.
Read More At : H350 Wireless Headset...

H700 now only dials last number called


On mine, if I wait for it to be fully connected with the phone, then press the button one time, the blackberry ask for the correct voice command. However, if I press the button twice, it will dial the last number called.
Read More At : H700 Wireless Headset...

No tone unless speaker is used.


Have you changed the fasica? if so you may have disposed of the speaker as it sits in the old fasicawhere the grill is
Read More At : Consumer Headset...

I just bought the Elite Flip earpiece. It is pairded. While driving I receive a call I have to retrieve my 3G I phone, turn it on, accept the call, then press the elite flip bar in order to use it...what a pain. When I wish to make a call, I similarly have to turn it on, push and hold the main button until the Voice feature comes on, then announce my call request, then switch it over to the Flip again. This can't be right...can you help me. I thought all I would have to do was push the button to either make or receive a call. Thank [email protected]


It *should* connect to your phone by just pressing the call button with a call comes in. (They all work this way). My guess is, based on your description, is that you are not just pressing the call button, but holding it. This resets the headset back to default and unpairs the phone. When you receive a call (after making certain it's paired) is to just tap the call button once.
Read More At : Elite Flip Bluetooth Headset Earpiece Hz720 Hz-720 89504n...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || radiocomunicate.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0941 seconds