Guide :Radio Communications : Talkabout T5720 (7 Channels) 2-Way Radio

Staying keyed up after button release

The unit seems to stay keyed up after pushing the button and then releasing. When powered up, the unit will receive normally, but once it is keyed up and then released, it continues to transmit, but no more voice audio can be heard and the unit is unable to receive until power cycled. The light also stays on after the button is released and the other radio still hears the slight static associated with the faulty radio transmitting but voice can no longer be transmitted after release.

Research, Knowledge and Information :


Heathkit SB200 stays keyed | WorldwideDX Radio Forum


Heathkit SB200 stays keyed. ... When I key it up relay stays keyed even after I release my manual pushbutton. ... SB200 staying keyed
Read More At : www.worldwidedx.com...

KeyED Up doesn`t work in After Effects CC |Adobe Community


I tried to change the keyboard settings with the script from KeyED Up. ... Open the Preferences dialog box and click the button ... 20160218075410.6eafe9c.release ...
Read More At : forums.adobe.com...

where can i get KeyEd Up for after effects cc ? |Adobe Community


where can i get the keyed up for after effects ? ... The KeyEd Up script only provides a convenient interface to do so. ... 20160218075410.6eafe9c.release_8.0.3.x ...
Read More At : forums.adobe.com...

How to make the LED stay turned on/off after I release the ...


Hello everyone, I'm new to the programming Arduino boards, and I was interested in how to make the LED stay turned on/off after I release the button switch ... Go Up ...
Read More At : forum.arduino.cc...

What Is PTSD? - PTSD: National Center for PTSD


Feeling keyed up (also called ... but that you have been staying away from because they remind you of the ... The National Center for PTSD does not provide direct ...
Read More At : www.ptsd.va.gov...

Kenmore electric dryer won't stay on after a push start button


Kenmore electric dryer won't stay on after a push start button. ... I see your Kenmore Electric Dryer won't stay on after you release ... Key#36 Control board ...
Read More At : www.shopyourway.com...

Never try to force the shifter - AGCO Automotive


Never try to force the ... push down with something such as the ignition key. This moves the release mechanism and we ... Other models use a release button or a ...
Read More At : www.agcoauto.com...

Posttraumatic Stress Disorder - Symptoms


Staying Healthy After Spinal Cord Injury & Disorder; ... Posttraumatic Stress Disorder Symptoms. ... Feeling keyed up.
Read More At : www.veteranshealthlibrary.org...

Create and customize shapes and masks in After Effects


Create and modify shapes and masks using Pen and shape tools and ... release the Shift key after releasing the mouse button. ... release the Shift key after releasing ...
Read More At : helpx.adobe.com...

Suggested Questions And Answer :


Staying keyed up after button release


I have never seen this problem before, check if the VOX is activated, this could cause to transmit the radio, but the voice must be transmited. check if the Accesory connector is not dirty, clogged or damaged
Read More At : Talkabout T5720 (7 Channels) 2-Way Radio...

Uniden uh064sx-2 2-Way RX Stuck On


Didyou have any luck resolving this issue? We currently have exactly the same problem
Read More At : GMR1038-2 (7 Channels) 2-Way Radio...

How do I sync my T5720(22 channels) Talkabout 2 way radio to my other T5720(22 channels) Talkabout 2 way radio?


Here is a link to the user guide http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T56XX_57XX_User_Manual_E.pdf Programming instructions begin on page 21 Best regards.
Read More At : Talkabout T5720 (7 Channels) 2-Way Radio...

My Meter Won't Move


Weather can effect your meter .Those meters are not very accurate just a base line get a good swr meter and then check it.If your getting good radio checks it could be the potentoimeter is dirty . Radio shack sells contact cleaner and lube try cleaning it . That might help
Read More At : 29 LTD CB Radio...

Keys does not function


My guess is that the battery is too weak install new ones and see if it works out good luck windman
Read More At : Talkabout T5720 (7 Channels) 2-Way Radio...

I want to communicate from t5720 talkabout to midland lxt303. When I set them to the same channel the talkabot gets out but will not receive unless I press the MON button on the face of the radio


Set your interference eliminator code on the T5720 and the Qt filter both to zero. You have one or both turned on. By setting them to zero you will turn them off. Then your radios should work together.
Read More At : Talkabout T5720 (7 Channels) 2-Way Radio...

Motorola t5720 walkie talkie not transmitting or receiving


To answer your questions: the airport xray should not have harmed them, and there is no reset button. If you are using the radios with the rechargeable battery pack, it most likely needs replaced. They have a life expectancy of 12-18 months. Here is a link to the Motorola store: http://www.store.motorola.com/mot/en/US/adirect/motorola;jsessionid=B7997F21F6A409F029D6DEC2CB194ADB.mot2?cmd=catDisplayStyle&entryPoint=adirect&catKey=601560&messageType=catDisplayStyle Clean your battery contacts both in the radio and on the battery with a pencil eraser. There is also a chance the radios are not programmed correctly. Be certain the frequency, interference code eliminator and the Qt filter (if any) are set identical to one another. You indicate you have a manual, I will insert a link here for those who do not, who might read this: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T56XX_57XX_User_Manual_E.pdf Lastly, you may simply have one radio which has failed. It is not likely both would fail at the same time, short of battery issues. The three items listed above are suspect: batteries, programming or one has failed. Best regards.
Read More At : Talkabout T5720 (7 Channels) 2-Way Radio...

Motorola Talkabout 5700, 60 second timeout?


The 60 second timeout is a feature which is necessary to keep from burning up the final amplifier in the unit. It keeps the user from ruining their radio. Most radios, including business radios have this feature. Continually holding down the PTT will also run the battery down very quickly. It would be best to try getting a regular baby monitor.
Read More At : Talkabout T5720 (7 Channels) 2-Way Radio...

We have 8 of these motoroll talkabout radios (unsure what model maybe MJ series?) we use here at school for evacuations. Today on 3 of them when we used the PTT button the radio turned off. Does anyone know Y? or how to fix it?


This is typically a sign of a bad or low battery. Try swapping the batteries with a known good unit and see if the problem goes away. If so, replace the battery pack. If it is not the battery, the radio has a deeper problem. Best regards.
Read More At : Talkabout T5720 (7 Channels) 2-Way Radio...

Unit will not stay on. With new batteries installed, the unit turns on while power button is held down. It immediately turns off when power button is released. The batteries have never lasted long.


If using rechargeable batteries, your batteries are not getting charged. Check your charger, battery contacts and batteries. Clean contacts with a pencil eraser. If using alkaline batteries, check placement of the batteries to be certain they are in the correct way, and also, clean the battery contacts.
Read More At : Rino 110 (14 Channels) 2-Way Radio...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || radiocomunicate.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1776 seconds